Cheers! Jesse
-----------------------------------

1997 15' Outlaw Sprint boat. Steel Keel. Super low hours 400hp/350 cid.  AT 309 with Turbine trim. All braided hosed. 2 custom  cages.  I for racing 1 for fun.  2 sets exhaust. Thru hull or dry stacks. powdercat69@hotmail.com
_________________________________________________________________
-----------------------------------

2003 scorpian 18/60 .190 bottom .125 sides. Less that 10 hours on a brand new 200HP Mercury sportjet. $16,000 central Mo ozoner55@yahoo.com

-----------------------------------

For sale 25 gallon aluminum fuel tank for sprint boat $100
253-569-8881
-----------------------------------

1997 21' Eagle Sprint.  Aluminum, Steptech, Steel Bottom.  Brand new Kodiak Marine 6.0 Chevy motor with 2 year dealer warranty.  $35,000.00.  Call 530-624-3607.
-----------------------------------

SOLD

-----------------------------------
I am looking to purchase a mercury 240 efi sport jet motor for my Seadoo 2000 Challenger.  top price paid.

Call 727-526-3529 x 101 or email mjguju@tampabayproperty.com

Michael Guju, Esq.

-----------------------------------

  2005. Sport 16
  Cromolly rollbar.
  Mercury 240 EFI (10 hours on it)
  Corbeau seats.
  Simpson 4 point seatbelts.
  4 impellers (3 and 4 blade)
  custom karavan trailer.
  back seats.
  red paint
  Bottom protection OT. (plastic)
  spare parts (for engine)
  ..........much more.
  if you want more pictures ore have any questions email me at
  USD.- 27500
  diegogotegui@yahoo.com.

--------------------------------

03 16-ft Sprint 240 Sport jet, Step tec, QT 100 bottom,  chromoly  roll
cage, Jet Trim waterproof full suspension race seats
  with full rear bench, Pop up cleats, nav. lights, and twin batteries.
Dual axle  all aluminum trailer. Fast and fun.
$19,999.00  Joe 702-420-4143 londonjet@mac.com
----------------------------------

Engine is bowtie block casting #10051107 500cid. sell with or without engine.  $7,000 with, $3,000 without
call for ???s 770-367-3994 or email me at joe54@bellsouth.net  Thanks
----------------------------------

Over $20K invested steal it for $9,500 or Trade/Part Trade for Harley.
Email me at  <mailto:spearit3@bentonrea.com> spearit3@bentonrea.com with any
questions or for more pictures.  (509) 948-2524
----------------------------------

1972 Taylor 18 foot race boat. Ford 460 crate engine with rebuilt jacuzzi pump,
less than 20 hours on both. Recently redone interrior that includes a radio
with cd player. Comes with 2003 trailer. Asking $8000 OBO. For questions or
more information call John at 314-616-6668 or leave message at 573-436-0600.
You can also email questions to ford1973@centurytel.net.

----------------------------------

For Sale 18 foot jetboat call 918 645 0439 for more info. ask for Robert
----------------------------------

1994 15' 5" Jetcraft  350 chevy , Race nozzle, place diverter, this is one fun boat. $8500 541-862-8029
-----------------------------------

1997 Eagle Sprint Boat, 17' SOLD

----------------------------------

engine:bbc 454 bored 30  over,rebuilt427 heads,188 exhaust valve angle plugs,427 aluminumintake,850 double pumper,k&n filter,msn ign.,21/2 reward headers,mercruiser fly wheel ,100 amp. chrome alt.,battery switch, new battery,high volume constant oil pressure pump.
drive:high  tension valve springs,apr head bolts,1200 hps head gaskets, dominator ,pump,aa impellor(bronze)red ware ring,very smooth,teleflex marine gadges,plastic racing seats with snap on pads,hot foot kenwood stereo (nice sounding)2 year old paint job.....
 speed: 78 mph,(0-78)in few seconds,prof built 500 hps
trailer custom made trailer for this boat tantum axel,new bearings new hubs,grease fittings lug nuts and tires,axel slightly tweaked rides great
asking $10,500.00 obo call (727)550-0371 st petersburg fla.
----------------------------------

 2001 Eagle 24' , 100" beam, Radius Step Tec bottom, 514" (625hp) pump gas crate engine. American Turbine jet, S.S. impeller, hyd. jet-a-vater, elect. engine cover,
$4,000 8-speaker, 2 amp. stereo system, 72 gallon gas tank, full storage boat cover, $75,000 + replacement value. Stored indoors, Call for more info. Only 35 hours!
  $45,000.00 (usa) / O.B.O
  530-345-4039
  530-520-2628
  gkheg@sbcglobal.net

----------------------------------

588 Big Block Ford

This motor is made to not compete for a World title, but win. This motor is expected to make 1000+ horsepower. All parts have been purchased and are brand new. The motor has been short blocked already. Can ship anywhere in the world.
  a.. Ford Motorsports block
  b.. Custom Bryant Billet Crank
  c.. ATI dampner
  d.. Carrillo Rods
  e.. Custom Wiseco Pistons
  f.. Custom Moroso dry sump oil pan
  g.. Moroso Dry Sump pump
  h.. Danny Bee belt drive system
  i.. MSD Distributer
  j.. Crower lifters
  k.. Profiler Heads www.profilerperformance.com
  l.. Titanium Valves, retainers
  m.. Isky Springs
  n.. T&D rockers
  o.. Custom Hughes Racing sheetmetal intake
  p.. Twin Dominator carburetors w/ K&N filters
  q.. Essex electric fuel pump
  r.. Custom Rewarder upswept headers

  $25,000 USD
contact ryan@bohhicaracing.com for inquiries
 

----------------------------------

New 2007 20ft custom built jet boat.  310 hp, 350 indmar-vortec carb engine, SD-309 AT pump, 12 degree, 1/4" 5083 bottom, 1/4" inlay in center with 5 box beams,
swim deck, jet gaurd, adj. trim tabs, walk through windshield, dual wipers, stereo, Endura paint, silver with grey and black interior, dual axel trailer with rock shields.  $40,000 including tax. This boat has aprox 1hr on it. Must sell
  Dewberry,  Alberta,  Canada .   More info phone 1-780-847-3176  email-  landone@telus.net
----------------------------------
Wanted-  rebuild kit for Berkeley JE jet drive. Will purchase a new or unused aluminium or stainless "A" impeller.
Also require performance parts for 460- weiand stealth 8012, Holley Street Avenger 770CFm etc.as well as performance short and long blocks.
Want to replace my Hardin marine logs with more performance oriented through transom marine manifolds.

Please email me @ carpe-diemwebb@telus.net
----------------------------------

1973  ROGERS CUSTOM JET BOAT
This boat was completely restored last year it has over $15K  invested in it.
 It has new paint,  gauges, carpet, upholstery, custom diamond plate dash,
$800 Corbeau seats and a  reconditioned marine Chevy 454 big block engine with 1
year remaining on the  warranty.  The boat has 10 hours use  since
restoration.  It also has duel  optima marine batteries and jetovator.  It has a Berkley
unit that was also reconditioned last year.  The boat starts first time every
time  and is very reliable.  The boat also  has the quiet exhaust system
which goes through the transom.  The boat was originally built for speed  ski
racing which was popular back in the 70&rsquo;s.  It has a semi &ldquo;V&rdquo; hull which means it
 handles chop very well.    I have got the boat up to 58 MPH with the GPS but
with a little tinkering  with the engine you could get a lot more out of it.
The boat is designed to go 100 MPH  plus.  I guarantee this is the  nicest
jet boat in Vegas.
K1W1KID@aol.com <K1W1KID@aol.com>
----------------------------------
2 B motors for sale, engines have same power. Dart engine was 106+ mph in
Peace River at this years Worlds.

- Dart Little M block, 366 ci, Callies crank, Carillo rods, Crower lifters,
T&D rockers, Brodix GB2300 CNC heads, Barns dry sump pump, Victory Titanium
intake valves, Manley Inconel exhaust valves, just installed new PSI valve
springs, Titanium retainers and locks, Jesel belt drive, Trend HD push rods,
13-1 comp, single and twin hats for sheet metal tunnel ram, spare pistons,
valves, valve springs, lifters and push rods. Approx 3 hrs on valves and
guides. Bottom end just redone - Block checked and honed, Fresh JE pistons
(Thermal Coating) and rings and bearings

- Brodix aluminum 363 ci, Brodix canted valve heads, Jesel rockers, Callies
crank, Oliver rods, Diamond pistons, twin 750 Holley's,  sheet metal tunnel
ram, Titanium intake valves, Manley Inconel exhaust valves, valve cover
spring oilers, piston oilers, Brand new PSI valve springs, titanium
retainers and locks, Trend HD push rods, Jesel belt drive, MSD Crank
Trigger, 13-1 comp, $3,000 Daily dry sump with deairator option. Motor has
about 45 minutes on it. Paid $45,000 CDN

Open to reasonable offers.  PM me here for more info.
jcfoster@telusplanet.net
(Also on the forum as Missbhaven)

----------------------------------
 I AM LOOKING FOR A 70'S STARBUCK JET BOAT AND I HAVE HAD NO LUCK IN FINDING ONE IF YOU COULD POST ME UP ON YOUR BOARD SO I CAN FIND A GOOD FAMILY BOAT CAUSE MY 5 YEAR OLD IS DRIVING ME CRAZY.
(303)912-0807
fireandiceperformance@LYCOS.COM
THANK YOU
----------------------------------
WANTED : 455 OLDS HEADERS FOR JET BOAT CALL-816-244-0230 0R E-MAIL ME: RIVERRACER100@YAHOO.COM

----------------------------------
WANTED JET BOAT HEADERS FOR 455 OLDS CALL TROY 816-244-0230
----------------------------------
I have a Berkeley JC pump for sale. it comes with everything but the steering nozzle. A brand new A cut aluminum impeller, shaft and berings needs attention. all or part. best offer. will ship with UPS, 97603
rob glenn <turbolas3@yahoo.com>

----------------------------------

For sale - 1978 SouthWinds Jet Boat. Berkley pump with stainless steal AB Impeller,
Ford 429ci with racing parts, less then 10hrs, 70mph, place diverter, new tires, carpet,
carb & oil. Fast and Fun $6500 or trade plus cash. Sean 505-350-5478

----------------------------------

1979 Colorado Custom 18' Berkeley Drive, A impeller. 500+ hsp Nitrous. Everthing rebuilt within 1 year. Too much to list. Fast and fun. $7k obo. In Colorado 970-539-0299  or scaramos@slbbi.com
----------------------------------
FOR SALE 2000 KWIKKRAFT 19.5 FT RACE TUNNEL HULL

  The hull comes with the following parts
  Steering System
  Gas foot throttle with cable
  Autosport race seats
  RCI 5 point  seatbelts
  Chromoly Rollbar
  2-28 Gallon fuel tanks
  Single axle trailer

 SOLD
-----------------------------------
Wanted Berkley Pump later style so I can use a droop and diverter.Also want same.Call Dave 509-863-4962 not 4255 any more. also any race parts,foot throttle,fuel tanks,etc.
-----------------------------------

14' Outlaw Sprint boat Finished by Willie boats for Willie himself.  240 hp
sport jet w 5 hours.  Boat has never been titled.  Super clean Super Trick.
Custom Paint.  Custom Tandem Trailer. Custom interior with diamond plate
dash and floor.  Built under floor fuel tank.  Custom Swimstep w/ladder.
dual bilge pumps. Custom Roll bar w/ski tow.  rear jump seats.  A one of a
kind playboat.  Catch it if you can. $21,000

Contact Tom (206)396-5380
-----------------------------------

Very competitive Donovan all Aluminium engine, Brodix heads from Weld Tech,
469ci A-class
engine. Has ran 110 mph with very little hull set up. All the best parts,
too much to list.
Replacement $43,000+ CDN. Only asking $30,000 CDN.
Would like to sell soon so make me an offer!
Call Jesse at 780-831-9165 for more
info or
jcfoster@telusplanet.net
-----------------------------------

#27 Makin Bacon
2003 19 foot Step-tech w/cover
Tandem axle trailer
Race spec rollcage
Dominator pump w/3 impellers
Motor is an LT 350

SOLD

-----------------------------------

28' Bentz..Twin  454BBC..212 Hamilton Pumps Hydraulic reverse.Center stick steer, Most all the bells and whistles. around 550 hrs  $100,000 or part trade
Chuck...208-375-8844
-----------------------------------

1995 TX-19 Youngblood
For sale, Hull only, engine not included. Oxidation from sitting outside in the Texas sun for two years. First $4,500.00 takes it. Serious buyers only please (972) 880-0160, for more pics: www.pmsdallas.com
-----------------------------------

SOLD!
-----------------------------------
FOR SALE

525 C.I.D. CHEVY &ndash; 723 HP / 685 FT LBS
ON PUMP GAS

502 BLOCK.  DART HEADS WITH JESSEL / 10.75-1 COMPRESSION
HAVE RECIEPTS AND DYNO SHEETS.  ENGINE IS COMPLETE INCLUDING HEADERS,
IGNITION, ALTERNATOR, OIL COOLER, OIL FILTERS, OIL LINES, PLATE MOUNTS & MORE. POSSIBLE TRADE FOR TOY HAULER

$12,000.00
MEDFORD, OR
541.773.4867
-----------------------------------

17-X Eagle Sport &ndash; 2003 Steptech
Formerly #22 "No Deposit No Return"
240 SJ
SS 4-Blade Impeller
Dual Bilge
Foamed Bow
Removable Chromoly Roll Bar
Full Interior
Go Race or Play on the Weekend
Lake GPS @ 61 mph
Asking $23,500 US
Contact: Mark Dorner @ 269-217-7353 or markdorner@hotmail.com

-----------------------------------

SOLD

-----------------------------------

2000 19' EAGLE SPORT, Step-Tech
SOLD

-----------------------------------

SOLD

-----------------------------------

    Too many kids and not enough time, Boat must go. 1995 Eagle 21' Tunnel,
ZZ502 Race motor, latest and greatest intake, bottom is in great condition,
American Turbine pump with Chrynuk race nozzle, Stainless steel impeller,
new Corbeau Racing Seats, new roll bar. Turn key race ready. 95+mph and very
competitive,currently in First place in AWJA BBFX points standing. Will sell
with or without motor.      25,000.00 OBO.      530-520-8029

-----------------------------------
WANTED: Used, Abused or Misused aluminum hull. Rough is good, needs lots of work is even better. Prefer an Eagle, but not necessary.
Would be interested in a pump also, but not required.
Cash in hand.
Jim, 403-304-3784 - cell
-----------------------------------

1979 Sidewinder 18SS
This is the classic Ken Baker Hull
Built 460 c.i. Ford - Runs Great
Straight Through Hull Exhaust
Original Sidewinder Engine Covers with Original Upholstery
Berkley 12C Jet
Great Gel Coat - Silver Blue Metal Flake
Excellent Original Upholstery-one split seam in the hatch cover
Trailer and Cover included
Steering and jet cables have been replaced
Recent tires and wheel bearings on the trailer
Great Deal - $4,900.00
I have owned this boat for the last 8 years
Always garaged and/or covered
Bought a cruiser (new wife wanted something with a head)
Boat is located about 40 miles North East of Atlanta near Lake Lanier

404-472-5077 Days  706-367-7221 Evenings
-----------------------------------

For SALE: 1974 Sleekcraft Rebel, 18ft
*SOLD*

-----------------------------------

SOLD

----------------------------------
Hello i'd like to sell my boat 2003 18x60 Scorpion 190 bottom 125 sides NEW 2007 200 Merc sport jet.Very clean nice boat. $17,000.00  Central MO.Ozoner55@yahoo.com 573-374-67367
----------------------------------
LOOKING FOR SBC OVER THE TRANSOM HEADERS PREFERABLY COMPLETE WITH THE WATER LINES...PLEASE EMAIL ME AT
lewis.hird@sympatico.ca or call 613-396-2821 thanks

-----------------------------------
Chevy small block standard
port headers with dyna tech merge collectors and schoenfeld mufflers for
sale. These are 1 7/8 tube with 3 inch collectors. Collectors alone are
around $300.00 each. These are nice headers and sound excellent. These will
fit over the back of the boat and have a bung for pyrometer welded in the #
6 tube.
SOLD

-----------------------------------

   It`s time to sell the toy. I have a beautiful 1996
      Scorpion Tx20 Blown BBC 496, jet boat. The boat is
      white and purple gelcoat,Autometer guages,dual
      stailess 13gallon tanks,new white bucket
      seats,domonator jet pump with AA stainless
      impeller,aqument shaft,ultiment wear ring,hydrolic
      place diverter,dual steering,ajustable trim plates.
      The engine is a Chevy tall deck 4-bolt block with a
      4.250 stroke luniti blower crank, luniti pro mod
      rods,jesel belt drive, crower custom cam,3/8 push
      rods,custom oil cooler and remote oil filter, dart pro
      1, 345 aluminum heads that have been flow matched
      only, stainless valves,littlefield 871 blower with
      hard anodized rotors and case with tefflon strips,
      superchiller intercooler,2 modofied holley 850 carbs
      inline,dooley scoop. The engine may have 10 hrs of run
      time on it. Over 50k invested and endless hours in
      detail. The trailer is a tandem axle with stainless
      fenders,new tires and aluminum rims and bearings. I`m
      sure i have left a few things out so ask questions.
      The boat is set up to run on super now with 7lbs of
      boost. The boat will run 97mph on gps now. I`m asking 27.5k for it make an offer.

      Email me @ dragboatdash@yahoo.com For more Pic`s.

-----------------------------------

19.5 foot Tunnel
SBFX Legal ( just need to bolt the steel rollbar back in )
ZZ4 Chev
Clear title and has OR #'s
Fun easy boat to drive full steel armor plate on the bottom and tunnels
for the learning curve
75+ mph
Seasoned but very dependable
SOLD

-----------------------------------
1994 90 Merc Sportjet
i need a complete used motor my original motor bleww mike 5197283645 or 519 9711889 cash waiting
-----------------------------------
HELMETS

4 Bell Racestar III helmets for sale, all with bags, all excellent
condition and all orange.

2 with mic's 2 without. I can easily remove the mic systems if they are
not needed. *No intercom system avail*

I want  $265 usd with mic and $210 usd without or I will take $850 USD
for all 4, Mics are aviation grade

James @ 403-304-3784 prefer to keep in pairs

-----------------------------------
I am looking for jet boat seats for my 1975 Taylor boat. I would like them to
be red or white but i am interested in any color.
E-mail nbodis2141@aol.com
-----------------------------------

1976 RODGERS JET 19 FOOT LS6 454 POLISHED ALUM SUPERCHARGER BERKLEY PUMP
IMCO ALUM FUEL TANKS CUSTOM TRAILER TO MUCH TO LIST
FOR MORE INFO PLEASE CALL ASK FOR BRIAN OR DAVE ASKING 25000.00 CANADIAN 12047831774
-----------------------------------

SOLD! Gone Racing!

-----------------------------------


SOLD
-----------------------------------

Looking for older race hull 17 to 21 ft, no drivertrain needed, I would
prefer a 1990 or newer tunnel. I would consider a v-bottom.
FOUND!

-----------------------------------

SOLD
-----------------------------------
Looking for a Dan Olson wet sump oil pan for a SBC. Must be mint and priced reasonable. Thanks 701.795.9284
-----------------------------------

383 GM Performance motor. 750 CFM Holley, Stainless Marine Exhaust, heat
exchanger, American Turbine SD jet w/SS largest impeller, All marine parts,
GPS speedometer.  The boat runs on pump gas, runs at 60 MPH all day at 4100
RPM.  It was designed as a sport boat with enough speed to really enjoy
yourself without tearing up the engine. (the engine is capable of handling
6500 RPM)  The boat temp stays steady with the heat exchanger, which is
important in cold Alaskan river water.

SOLD
-----------------------------------
I am looking for a used jetavator for 78 mantra 454 eng
has a j 12 berkley pump  cable or elec.
johnnyarrington@gmail.com
-----------------------------------

WANTED:   looking for a Berkley pump [JC]  you can reach me on phone or email.      509.681.4228       rcweaver@centurytel.net
-----------------------------------

Jet boat berkley  hi po 455 Olds.Excellent condition , motor has never been in the water 0 hours , brand new seats $6,000
 Please contact bfarr106@tampabay.rr.com Or (863) 397-2424
----------------------------------
RONALD ZIMMERMAN
rnpz@earthlink.net
EarthLink Revolves Around You.

wanted 1989 to 2002  tunnel hull boat with pump no motor necessary aluminum race hull if possible.....
-----------------------------------

Boatracers Garage sale:  1 Donavan 540 Cu.,Dart,Jesel,Kinsler, Aviad,Carillo,Ross. etc. set up for
                                  marathon racing.

    1 Hamm's 19' race hull.
                                1 new 21' SS Eliminator tunel hull.
                               Dominator and American turbine pumps
                                1LS 6 B.B complete and race preped by Lee Bros. [no heads]
                               1 Boat trailer
                               1 Boat, Car combo trailer
                               Lots of spare parts, snoots, wedges, rods, cams, lifters, valves, retainers,
                               rocker arms , impellers, pump shafts, etc.

Also looking for a set of B.B. Chevy aluminium heads.

Marv/Jo Hamm <marjohamm@hotmail.com>

-----------------------------------
I would like to buy;
- a Precision impeller, size C or bigger and must be in excellent condition.
- AT, Aggressor, or a Legend bowl.
-a bellhousing for a sbc that will accommodate
both top and bottom mount starters

you can email me at jcfoster@telusplanet.net

-----------------------------------

2006 21&rsquo; EAGLE TUNNEL

SOLD

-----------------------------------

21' First Water Jet Boat

SOLD

-----------------------------------
I have a set of hardin alluminum exhaust manifolds for a big block ford 460.
I also have a Complete berkley pump out of a jet boat i come across and decided to get rid of.
I still have the complete boat and a bill of sale but no title all for sale make an offer for manifolds, parts or whole boat.

  Copeland1245@yahoo.com

-----------------------------------

Am looking for an old style Nordic cast scoop. They came as original
equipment on the 74-75-76-77 19ft jet boats. They are not very pretty so
I know some body has one hanging on a wall somewhere.

Danny Ennis
Desk     919-463-1605
Fax       919-380-6717
Cell       919-796-6450
ddennis@ci.morrisville.nc.us
-----------------------------------

 21ft Kachina
 Restored to new, blue metallic paint, NEW big block 460, Berkeley jet dive, place diverter, interior & trailer,
must sell $9,950 OBO save thousands,  (262) 628-3153 Milwaukee WI dstingl99@yahoo.com

  Partial List of work:

  Boat New Paint - Viper Blue metallic, New rub Rail
  Interior New Seats, engine compartment, wiring, gages, carpeting and Gas tank
  Engine New Crate engine - Ford OEM, aluminum intake, Distributor, wires, coil, value cover, battery, Rebuilt Carburetor, Starter, Alternator
  Trailer New Paint -powder coated, wiring- lights, axles, hub, springs, tires, disk Brakes, bearing buddies, Fender, hitch
  Jet Drive New paint - powder coated, New place diverter, Rebuilt pump, all new bearing and shaft

  Invested over $13,000 in the last three year (plus my labor)

-----------------------------------

1979 nordic 22' daycruiser
454 chevy rebuilt in fall of 2005,750 holley on aluminum intake,540 lift cam dominator pump, A impellar.
New gauges,stereo,transom,floor,carpet,seats,bimini top,tires,and wheels. 4500.00 contact duane mullenix at 361-550-9667 or email me at taylormanss@yahoo.com.

-----------------------------------

350HP 11' pickle fork tunnel jet

I have too many boats right now and one must go so I cut the price on this
one. Beautiful show condition 6 color gell coat electric place diverter,
Turbocharged and intercooled mazda RX7 13B rotary built by racing beat(
engine alone cost alot more than I am selling the boat for) Fast Fun & draws
more attention than any big block boat that I have owned.turnkey ready to
go.
$4000 turnkey or $2500 minus engone
(775) 340-5085

-----------------------------------
Looking for a good set of Headers for a 455 Olds over or thru  transom
 (mailto:Spraw@aol.com)  or  801-774-0922

-----------------------------------

2004 21 Eagle Tunnel Race Hull.  sold.

-----------------------------------
Stainless impellers, one A, one AB, $600 for either one.
Harding race nozzle trim unit. $900
509-669-9898      509-782-1349
Terry O'Keefe <TOKeefe@cityofwenatchee.com>
-----------------------------------
WANTED:
Water jacket headers for SBC. Need the ones that will stay under the hood.
Kevin Adair <kadair55@elmore.rr.com>

-----------------------------------
Paul's cut-rate Hotrod Boat Parts Shop

Moroso dry sump tank w/heater $300.00 or best offer. over $600 new
Dart intake for 4150 Carb w/ adapters and spacer for dominator $150.00
1250 Barry Grant Dominator Carb $350.00
Contact Paul Bagshaw at pbagshaw@cmspan.net

-----------------------------------
Wanted:  Berkeley / Dominator / Aggressor / AmerTurbine jetdrive parts:
    Race/Stock. Anything/Everything.
    Loaders and Jetaways of special interest.
    Email with what you might have.  CBMJet@aol.com.
-----------------------------------

SOLD

-----------------------------------

SOLD!
-----------------------------------
wanted; long droopsnoot for a berkly 12jg pump and butt cheek reverser
contact Jbb496@aol.com
-----------------------------------

2005 AlumaGator (Eagle) 21' Tunnel. SOLD
-----------------------------------
Southwind 18' Ford 460with hooker header dry pipes. just rebuilt berkley
jet. and trailer. i can send pictures if asked.
Russell 208- 308-2143
-----------------------------------

I bought this boat a couple years back. It went
through a police auction and they could not read the
VIN so they were sending it to the crusher. I bought
it from the storage lot with a bill of sale but no
tittle. The hull is in great shape and has a great
design. I have had no time to anything with it and
would prefer to see someone save this one. There is no
motor or interior. The trailer is shot. It has new set
of gauges and good tank and jacuzzi pump. Location is
Houston and $500.00 would take it.

Thanks
Jamey
281-914-2742
-----------------------------------

2003 Placecraft Stepcat 22' Jet Boat
540 Whipple charged motor by RC Performance with the best of everything. Legend blue printed pump by MPD with SS pre-impeller, loader grate, droop snoot, Hydro place diverter / interchangeable nozzles, Faria white guages, duel gel marine batt, bimini top, 6 speaker Clarion sound sys. with 2 amps and 10" sub. Lots of extras, power everything. Very clean & very fast. Competitive trailer w/spare tire & wired with all LED lights. 50 hours on boat. 3 hours on motor. Great family boat but wife wants it out of here! $52,500 OBO. Call Ken at (310) 433- 7732 (cell).

Thanks,
Ken Ackert
LBSIGMAPI@AOL.COM
-----------------------------------
Wanted: Wet exhaust manifolds for 455 Olds. 1971 or '72.  (H 2397, H 2398)

dabond@cableone.net
-----------------------------------
WANTED
Msd marine ignition box 707 921 9179

(MSD6-ALM?)
-----------------------------------
I am looking for 2 used Hamilton HJ 274 or HJ 292 jet pumps that are complete to buy at a reasonable price. I am putting together my fishing boat here in Alaska
Eddie Angasan <eddie@bristolbay.com>
-----------------------------------
Jetboat wanted in trade for CNC Plasma Cutting Machine. We will build any size of table for you.
Please see our website www.fastcutcnc.com
Brian Gallup (FastCut CNC Inc.) <brian@fastcutcnc.com>
-----------------------------------
WANTED: Eagle Trim Nozzle.  I have seen these before at races.  It is a big collar that is bolted between bowl and the steel race nozzle.  I think Tim Harding made them.  Anyone have one or know where to get one?  Please contact Mike at seattlejetter@yahoo.com
-----------------------------------

1996 Eagle Sprint 21' 502 BBC
SHOW BOAT!!!  This boat is absolutely INCREDIBLE!  "House of Kolor" Paint.
Owned by Metal Armor as a Show Piece to highlight their incredible polishing
products.  EVERYTHING on this boat is IMMACULATE!  The owner has used the
boat in the water THREE times!  Under 20 hours on the 625 HP Arizona Speed &
Marine 502 MPI.  Custom grind Crower billet roller cam, Crower roller
rockers,  The Best of Everything only begins to tell the story.  Hydraulic
Jet-O-Vator on an American Turbine jet, Polished and Painted, Polished
intake, powdercoated & polished 6 wheel dolly (for enclosed transporter),
1997 Tricker Tandem axle trailer with Polished mags & spare, towing bra,
cockpit cover, CD player, Liquid filled Auto-Meter gauges, full engine
cover, thru-hull exhaust with polished tips, ceramic coated polished
Rewarder headers, Custom billet T-6 Aluminum swim platforms (polished),
chambered exhaust system also polished, custom one-off dual K&N air intake,
Momo steering wheel on a rack & pinion system, Optima battery, plated fire
extinguisher, braided lines, etc.  You won't find a cleaner boat ANYWHERE!
This boat is TRULY a 10!!!!  Over $60,000 cash invested and that's BEFORE
they polished EVERYTHING to A SHOW QUALITY FINISH!  $34,900 firm.  (512)
917-8044
-----------------------------------
Wanted: Jacuzzi WJ Impeller. I need the A type for waterskiing.
I currently have a B type if someone needs this one for more speed.
Jeff - jdbiz5@earthlink.net

-----------------------------------
Wanted:   Reverse bucket for Hamilton 212. Contact jefschlag@hotmail.com
-----------------------------------
Looking to convert my jet from Olds to BBC.
Need front and rear mounts and wet manafolds.
Contact Dave at 509-863-4255

-----------------------------------
In Kansas City, Missouri area:searching for a decent
jet boat with a trim control and water injected headers.

klyon@kc.rr.com or # 913-220-6107.

-----------------------------------

1972 Sidwider 18 foot. Trailer pulls great galvanized spare in good shape. New steering cables last year new throlle cable this year. 70mph boat. Berkley jet, olds motor 475hp. thru hual exuast,floor in solid. pylon  great machanical condition. Jell coat in good shape. I live in Indy, IN 46122. $2000 OBO
317-341-2677
-----------------------------------
Trying to find a set of Chevy small block headers. Water jacket of
possible injected. Please let me know if you have any you want to get
rid of. Thanks Randy  Please email me at rbender@ajrose.com     or call
my cell 4402232057
-----------------------------------

2001 Eagle Sport 16'10 ,  175HP Mercury SportJet, Teflon Bottom, Reverse, Clarion XMD3 Waterproof Deck, Kicker Speakers, Only 77Hrs.  EZ loader trailer.  Boat is in excellent condition.  Quick Sale 23,000.00
780-982-4562
Edmonton, AB
dhokanson@remsatcommunications.com
-----------------------------------
I have a few boat parts I'd like to sell, I bought a 1961 Mandella Speed
boat that for the 389 Pontiac motor.

The hull was rotted out but the boat still ran well.

What I have for sales are the left over parts:

(email for more and larger pictures mnnco@comcast.net)
-----------------------------------
I am looking for a set of inexpensive gas tanks for a 21 superior day
cruiser.  I can get the old ones out but they are rusted really bad.  I
would like to fix up a pair out of the boat and then just put the new in and
take out the old ones in one swap.
Please email me...
gary.stark.jr@cox.net
-----------------------------------
looking for a  PLACE DIVERTER for a berkley, and over the transom headers for a small block chev...
call or email, tattoo_life@yahoo.com or call 613-396-2821...i`m in ontario canada
-----------------------------------
wanted:440 jet boat headers, we are located in antioch california...phone
number is (925) 778 7820. e mail for contact is missygirl78@aol.com
-----------------------------------
I`m restoring an 88 Condor "Super Cruiser" and need :  All BBC 396, oil
pan/pick-up, starter, front water port adapters, thermostat  housing, crank pully,
water lines for Rewarded headers, front mount and stringer  ears, drive line
crank bolts, air Gap RPM intake, marine carb (Holley), and  $1,000,000.00 so I
can finish it. I would be happy w/any or all. I`m in Ohio and  will drive or
arrange shipping pickup. Call me anytime at 740-360-6616 or email  at
dibble8@aol.com

   I`m also looking for a 1988 Hot-Boat magazine that features the Condor
bellow. don`t know what month, but it was once supercharged and  featured.

-----------------------------------
 

Wanted a used berkley jet drive for a 77 glastron carlson cvx-18.  Bolt up to a 351 Windsor.  701 527-6688
 
 

-----------------------------------

SOLD!
-----------------------------------
Looking for a set of wet logs for a BBC Jet.  Need all parts
from block to transom.

email me at jamie_warwick@comcast.net
-----------------------------------
6/6/2006
-----------------------------------
I have a 1976 jet boat berkley jet hardin hi po 455 all there but went threw
a flood trailer included hull is in fair shape no holes cheep $500 obo kansas
Dougk71@aol.com
-----------------------------------

1998 18ft Eagle Sport with 2001 Mercury 240 SportJet.  Step-tec hull, Less than 30 hours on boat,  excellent conditon. Hand or foot throttle.  58 mph. Very fun boat. Include ez-loader trailer.  Asking $15,500 of best offer.    Oshkosh, WI  54963 contact: Glenn at H20SKIIWI@yahoo.com or 920-410-8880
-----------------------------------

4-25-06
-----------------------------------
I have two unused (take outs) Kodiak 120 jet drives.  These are two stage pumps with 7.5" ss impellers, cast aluminum housing and ss driveshaft.  My phone is 508-693-4219 and I am located on Martha's Vineyard, Ma.
-----------------------------------
WANTED chevy small block exhaust logs and risers -
FOR SALE bassett over transom headers with hardware, in good shape 100.00
call 253-569-8881 or 253-939-3894 or e-mail me rjb.1@NETZERO.COM
-----------------------------------
18'  1979  sterling jet boat with a panther drive,with a SS impeller, ride plate,all gauges,new battery,bassett wet headers. Boat is set up for a chevy big block. Seats are in good shape and match the two tone blue paint of the boat. Boat comes with a blue single axle trailer. This boat is very lite and runs very well with a big block. This boat handles very well. Boat has been used on lake Texoma for the last few years. Other needs force the sale of this boat! Boat is located 1 hr north of Dallas Tx... No pics at this time. Can be contacted anytime @ cell # 903-821-4103 or  903-271-2562 asking $3,195.00  OBO
-----------------------------------

1972 Eliminator Jet Boat, Ford 460hp. In Excellent condition inside and out.
Great fast boat. $7,000. Call Mike 406-439-0331
 

-----------------------------------

Item 1.  Big block Chevy water jacketed IMCO manifolds with stainless
32" over-the-transom wet stacks.  Aluminum.  Never been in salt water.
$1,200.00

Item 2.  Big block Chevy jet boat oil pan, baffled with trap door.
Handmade-does not leak.  11 quart.   $100.00

Tom @ (360) 262-0292   Monday-Friday   9-5 p.m. (Pacific time)

-----------------------------------
WANTED!!!!!!   I'm looking for decent over the transom wet  pipes for BBC.
Preferably Bassett.  I have good collectors just need good  wet headers I can
weld them together if need be.  Contact me at
                                         stillcrazyjimmy@yahoo.com
-----------------------------------

Full wet sump dan olson oil pan for donovan 500 block, trap doors ,windage tray, crankscraper. cost 750.00 new . sell for 375.00   tegwenk@msn.com<mailto:tegwenk@msn.com>
-----------------------------------

SOLD
-----------------------------------

I am in the market for a 17' to 19' out law or eagle sport hull.

Preferably the step tec hull, drive train not important, will consider

Complete boat or hull and pump.

Please contact JD @ 1.780.805.3211 home

                                 1.780.805.5395 cell

                             or @jdgmntl@telus.net

-----------------------------------
For Sale- 1979 Youngblood TX 19 Jet Boat
Hand Laminated. 450 lbs
Lake boat. 19 ft
Tom Morrow blueprinted pump.
B impeller.
Ride plate.
Set up for big block chevy.
Chrome water injected headers.
Asking $5500. Less engine.
Call Stephon Price 601-482-6688
                             601-934-7833

-----------------------------------
WANTED "Jetboat race pump" parts all types
  call Scott 707-689-4944
Scott Williamson
Email : OutlawChassis @ yahoo.com
"Run like an outlaw" @ the best damn chassis shop in town !!
-----------------------------------
Wanted: Arneson ASD8 Surface Drive.
I'm looking for a used Arneson ASD8-6 or ASD8 Surface Drive in good condition preferably a complete unit with hydraulic cylinders, controls, and pump. If you have any leads on a used, 'reasonably priced' setup, please e-mail me: larry@skagitmedia.com  Thanks!  Larry
My turbine powered boat project; http://www.weldingfaq.com/turbine2.asp

-----------------------------------
 

for sale new 2006 boat hull call for info 918 645 0439

-----------------------------------

A-Class Marathon Motor
401 SBF, Motorsport Aluminum Block 9.5" deck
3.800 Kryptonite billet crank, EN30B
6.300 Carillo rods, Carr SPS bolts 7/16
Custom JE Pistons 12.25 -1 comp, coated domes and skirts
Cometic head gaskets
C302b Motorsport heads ported by Craig Gallant(GTP) in Houston, 373 CFM @ 700, coated chambers and exhaust ports
Ferrea stainless valves 2.19 + 1.60
Del West tit retainers, Kevlar spring pads
Coated Isky tool room gold stripe springs with R.A.D. process
Jessel shaft rockers, Manton push rods
Billet sprayer valve covers
Fully ported Roush intake, Wilson 2"  4 hole spacer
Braswell 950 carb, custom billet roller cam, 8620 copper coated core w/prem heat treat
Burns stainless custom exhaust
Mallory crank trigger ignition
Peterson 5 stage dry sump oiling
Jeff Johnson's Billet Fabrication 2 piece pan and 5 gallon tank with custom billet scavenge filter and stainless screens
Aeroquip hoses and fittings
Danny Bee belt drive, ATI super dampner
Powermaster race alternator, Racemate water pump
Magnaflow 350 GPH fuel pump and regulator
Reactor aluminum flex plate, custom hand onodized pulleys
Custom allow mid plate and bell housing with 1350 spicer drive line, MSD ignition and box coil
All receipts, dyno sheets, Cam Doctor reports, etc are available.
All parts are brand new including all the spares, rods, pistons, etc.
This motor was designed by Barry Prescott of Prescott Motorsports 604-820-0262
Assembled and Dynoed at Richmond Engines 604-888-9622
Dyno pictures available at www. Richmondengines.com
Heading Ford riverboat engine
Never used, only dyno time
560 ft lbs @ 5900   700 HP @6800
555 ft lbs @ 6200   655 HP @6200
For more information contact Rob Chadwick 604-826-7361

Price $ 36,000 CAD